po 25 www.recom-international.com august 2002 rp05-4805saw: derating curve powerline - dc/dc-converter aw -series, 5w, 1.6 kv isolation, regulated, 4:1 wide input range (single & dual output) 5 watts regulated output power 4:1 wide input voltage range five-sided shield standard 24 pin dip & smd t ype package high efficiency up to 82% ul 1950 component recognised international safety standard approvals features art number smd input output output input current efficiency capacitive suffix range voltage current (see note 4) (see note 5) load max. dip vdc vdc ma ma % f rp05-243.3saw (smd) 9-36 3.3 1000 191 76 2200 rp05-2405saw (smd) 9-36 5 1000 285 77 1000 rp05-2412saw (smd) 9-36 12 470 309 80 220 rp05-2415saw (smd) 9-36 15 400 329 80 150 RP05-2405DAW (smd) 9-36 ? ?00 282 78 ?80 rp05-2412daw (smd) 9-36 ?2 ?30 295 82 ?00 rp05-2415daw (smd) 9-36 ?5 ?90 313 80 ?8 rp05-483.3saw (smd) 18-75 3.3 1000 100 73 2200 rp05-4805saw (smd) 18-75 5 1000 145 76 1000 rp05-4812saw ((smd) 18-75 12 470 155 80 220 rp05-4815saw (smd) 18-75 15 400 167 79 150 rp05-4805daw (smd) 18-75 ? ?00 145 76 ?80 rp05-4812daw (smd) 18-75 ?2 ?30 151 80 ?00 rp05-4815daw (smd) 18-75 ?5 ?90 159 79 ?8 selection guide 24v and 48v input types 125 75 50 25 0 100 ambient temperature range ( c) -40 -25 -10 0 50 60 70 80 90 100 output power (%) natural convection m1 version m1 v ersion
po 26 www.recom-international.com august 2002 specifications (typical at nominal input and 25? unless otherwise noted) output power 5w max. vo ltage accuracy (full load and nominal vin) ?% minimum load (see note 1) 10% of fl line regulation (ll-hl at full load) ?.2% load regulation (25% to 100% fl) single ?.5% dual 1% cross regulation (asymmetrical load 25%/100% fl) ?% ripple and noise (20mhz bandwith) 50mvp-p t emperature coefficient ?.02%/?, max. tr ansient response (25% load step change) 200?ec over load protection (% of full load at nominal vin) 170% typ. short circuit protection continuous, automatic recovery input voltage range rp05 24v nominal input 9-36vdc rp05 48v nominal input 18-75vdc input filter pi type input surge voltage (100 ms max.) 24v input 50vdc 48v input 100vdc input reflected ripple (nominal vin and full load) 20map-p start up time (nominal vin and constant resistor load) 600ms typ. efficiency see ?election guide?table isolation voltage in to out 1600vdc min. i/o to case dip type 1600vdc min. i/o to case smd type 1000vdc min. isolation resistance 10 9 ? min. isolation capacitance 300pf max. switching frequency 300khz typ. approved to safety standards ul 1950, en60950 case material nickel-coated copper base material non-conducted black plastic potting material epoxy (ul94-v0) w eight dip 16g smd 18g dimensions see ?ackage style and pinning?on next page mtbf (see note 2) 3.165 x 10 6 hours operating temperature range standard -25? to +85? (with derating) m1 (see note 3) -40? to +85? (non-derating) m2 (w series) ?0? t0 +85? (with derating) maximum case temperature +100? storage temperature range -55? to +105? continued on next page powerline - dc/dc-converter aw -series, 5w, 1.6 kv isolation, regulated, 4:1 wide input range (single & dual output)
po 27 www.recom-international.com august 2002 pin pitch tolerance ?.35 mm package style and pinning (mm) 15.20 bottom view 20.30 16 15 14 9 10 11 2 3 23 22 31.80 5.1 17.80 4.6 3.8 10.20 pin size: 0.5 dia or 0.25 x 0.50 rectangular 24 23 22 21 20 16 15 14 13 bottom view 1 2 3 4 5 9 10 11 12 20.30 23.40 25.40 pin area 1.0 x 0.5 32.00 11.2 10.9 2.54 3.81 6.35 0.5 specifications continued (typical at nominal input and 25? unless otherwise noted) thermal impedance natural convection 20?/watt thermal shock mil-std-810d vibration 10-55hz, 2g, 3 min. period, 30 min. along x, y and z relative humidity 5% to 95% rh conducted emissions en55022 level a radiated emissions en55022 level a conducted immunity en61000-4-6 perf. criteria 2 radiated immunity en61000-4-3 perf. criteria 2 fast transient en61000-4-4 perf. criteria 2 esd en61000-4-2 perf. criteria 2 notes 1. the rp05 aw- series requires a minimum of 10% loading on the output to maintain specified regulation. operation under no-load condition will not damage these devices, however they may not meet all listed specification. 2. bellcore tr-nwt-000332. case l: 50% stress, temperature at 40 ? (ground fixed and controlled environment). 3. m1 version is more efficient, therefore, it can be operated in a more extensive temperature range than the standard and the m2 version. 4. maximum value at nominal input voltage and full load of standard type. 5. typical value at nominal input voltage and full load. 6. there is no pin at pin 10 & pin 15 for the rp05-w series. smd pin connections pin # single dual 2 vin vin 3 vin vin 9ncco mmon 10 nc nc 11 nc ?out 14 +vout +vout 15 nc nc 16 ?out common 22 +vin +vin 23 +vin +vin others nc nc dip pin connections pin # single dual 2 vin vin 3 vin vin 9ncco mmon 10 nc nc (see note 6) (see note 6) 11 nc ?out 14 +vout +vout 15 nc nc (see note 6) (see note 6) 16 ?out common 22 +vin +vin 23 +vin +vin powerline - dc/dc-converter aw -series, 5w, 1.6 kv isolation, regulated, 4:1 wide input range (single & dual output)
|
